IRP is processing the following polymers:

• Natural Rubber (NR)
• Styrene Butadiene Rubber (SBR)
• Butyl Rubber (IIR)
• Halobutyl Rubber (Bromobutyl / Chlorobutyl Rubber)
• Ethylene propylene Diene Terpolymer (EPDM)
• Polychloroprene (CR)
• Acrylonitrile Butadiene Rubbers (NBR)
• Chlorosulfonated Polyethylene (Hypalon) (CSM)
• Epichlorohydrin / Ethylene Oxide Copolymer (ECO)
• Hydrogenated Acrylonitrile Butadiene Rubber (HNBR)
• Acrylic Esters Copolymer (ACM)
• Acrylic Ester / Ethylene Copolymer (AEM) (Vamac)
• Silicone Rubbers (MQ)
• Fluorosilicone Rubber (FVMQ)
• Fluorocarbon Rubber (FKM) (Viton)
• EPDM with peroxide cure to meet E.C.D Resistance need in EVs & BS VI variant (EPDM Peroxide)
• Chlorinated Polyethylene (CPE)

We adjust the rubber compounds used to manufacture components for export to suit the climatic conditions like ozone concentration and low temperature level etc. We also follow strict global regulation of pollution control from using certain chemicals to control heavy metals, nitrosamine content and also for the restricted use of aromatic oils in certain applications.

• Mistake Proof Weighing System-1 No.
• 35 Liters Kneader – 1 No.
• 16” X 42” Open Mixing Mill With Stock Blender – 1 No.
• 14” X 36” Open Mixing Mill – 1 No.

Our range of rubber Moulded components include, Mountings and Rubber Pads, Premium Quality Silent Block Bushes, Grommets, Axle and Steering Rubber Bushes, Rubber Boots to guard automobiles from dust, Steering and Gear Shift Gaitors. Apart from this we produce a wide range of automobile rubber parts & gaskets.

( All Conventional Moduling Presses are replaced with PLC Presses with draw out facility. Vacuum & Injection Moulding Presses are used for Moulding O ring and Critical Profile Parts)

Our extruded items include various types of hoses for radiators, coolant hoses, breather hoses, inter cooler inlet and outlet hoses, fuel hoses etc. We also make turbocharger hoses satisfying EURO- VI norms and can be used from -40 deg.celsius to 250 deg. Celsius. This is made of FKM or FSR in the inner lining with silicone rubberized aramide fabric reinforcement with heat resistant silicone rubber cover. We also make wide ranges of silicone rubber based hoses.

• Cold feed extruders -100mm, 90mm, 70mm –2 No. each
• Hot feed extruders –63mm, 100mm –1 no each
• Vertical Braiding m/c 24 carrier –4 nos,
• Vertical Braiding 36 carrier –1 No
• Horizontal Braiding m/c 48 carrier –1 No
• Horizontal Knitting m/c –2 No's
• 3 Roll Calender10”x 30” –1 No
• Vulcanizer -5 nos (1.5m x 3.5m L –3 nos,1.2m x 4.5m L, 1m x 4.5m L – 1 no)